Ring-opening polymerization of propylene oxide by double metal cyanide catalysts prepared by reacting CoCl2 with various metal cyanide salts

Abstract Polymerization of propylene oxide (PO) has been carried out by using a series of double metal cyanide (DMC) catalysts prepared by reacting dicationic CoCl 2 with dianionic K 2 Ni(CN) 4 , K 4 Fe(CN) 6 , trianionic K 3 Fe(CN) 6 , or K 3 Co(CN) 6 in the presence of tert -butyl alcohol as the complexing agent and poly(tetramethylene ether) glycol as the co-complexing agent. The resulting DMC catalysts are characterized by elemental analysis, X-ray photoelectron spectroscopy, infrared spectroscopy, and X-ray diffractometry. Screening the catalytic activity in PO polymerization shows that it is dependent on the type of catalyst, relative ratio of cationic cobalt and anionic metal salts, and polymerization conditions. Thus, the DMC catalyst prepared by reacting CoCl 2 with K 2 Ni(CN) 4 yielded the highest activity. The polyols produced by DMC catalysts had a very low level of unsaturation. The molecular weight and particularly the polydispersity of the resulting polyols are sensitive to the type of anionic metal salts.