Geometrical Spreading Factor of Head Waves in Cased and Open Boreholes

Factors (coefficients) of geometrical spreading of compressional and shear head waves are calculated for an impulse multipole source of elastic oscillations in boreholes. It is shown that the length of the logging tool (i.e., the distance between the source and the nearest receiver) used for sonic measurements and the velocities of elastic waves in the medium both contribute to the factor of geometrical spreading. For a high-velocity formation (the shear wave velocity in the rock is higher than the compressional wave velocity in the fluid that fills the borehole) and a sufficiently long sonic tool with a monopole source, the coefficient of geometrical spreading is approximated by asymptotic formula 1/Z [Roever et al., 1974; Krauklis and Krauklis, 1976], where Z is the length of the tool; i.e., the amplitude of the compressional head wave decreases proportionally to the distance between the source and the receiver. In acoustically soft formations, this approximation is inapplicable even for long tools with length Z > 4 m. Waveforms in cased boreholes have a significant frequency dispersion even in case of good-quality cementing, and the factor of geometrical spreading there depends considerably on the length of the tool and the elastic properties of the rocks.