Investigation on the Copolymer Electrolyte of Poly(1,3-dioxolane-co-formaldehyde).

A series of copolymers are prepared via cationic ring-opening polymerization with 1,3-dioxolane (DOL) and trioxymethylene (TOM) as monomers. The crystallization behaviors of the copolymers can be suppressed by adjusting the ratio of DOL/TOM. With LiBF4 as a source for a BF3 initiator, copolymer electrolytes (CPEs) can be prepared in situ inside cells without needing nonelectrolyte catalysts or initiators. The ionic conductivities and Li(+) diffusion coefficients ( D Li + ) of the CPEs increase with a decreasing DOL/TOM ratio in a certain range. The CPE with a DOL/TOM ratio of 8/2 has the highest ionic conductivity as well as D Li + and shows excellent interfacial compatibility with lithium (Li) metal anodes. Li-Li symmetric cells can be uniformly plated/stripped for more than 1200 h. Furthermore, LiFePO4 -Li cells with 8/2-CPE display stable cycling performance for over 400 cycles. This strategy is a promising approach for the preparation of high-performance polymer electrolytes and is sure to promote their application in Li metal batteries.