Fine Cryo-SEM Observation of the Microstructure of Emulsions Frozen Via High-Pressure Freezing.

An emulsion, a type of soft matter, is complexed with at least two materials in the liquid state (e.g., water and oil). Emulsions are classified into two types: water-in-oil (W/O) and oil-in-water (O/W), depending on the strength of the emulsifier. The properties and behavior of emulsions are directly correlated with the size, number, localization, and structure of the dispersed phases in the continuous phase. Therefore, an understanding of the microstructure comprising liquid-state emulsions is essential for producing and evaluating these emulsions. Generally, it is impossible for conventional electron microscopy to examine liquid specimens, such as emulsion. Recent advances in cryo-scanning electron microscopy (cryo-SEM) could allow us to visualize the microstructure of the emulsions in a frozen state. Immersion freezing in slush nitrogen has often been used for preparing the frozen samples of soft matters. This preparation could generate ice crystals, and they would deform the microstructure of specimens. High-pressure freezing contributes to the inhibition of ice-crystal formation and is commonly used for preparing frozen biological samples with high moisture content. In this study, we compared the microstructures of immersion-frozen and high-pressure frozen emulsions (O/W and W/O types, respectively). The cryo-SEM observations suggested that high-pressure freezing is more suitable for preserving the microstructure of emulsions than immersion freezing.