On the Minimum Range Length for Performing Accurate Direct Far-Field Over-the-Air Measurements

Over-the-air (OTA) performance evaluation requires large investments in anechoic environments. The question of minimizing the test distance is hence critical, and even more in this time where millimeter-wave technologies are about to be largely deployed in 5G devices. A recent publication has identified that direct far-field measurements can be accurately carried out at a much shorter range length than the well-known Fraunhofer distance. This paper introduces a further validation of this reduced distance, by employing an innovative method to simulate spherical measurements with arbitrary DUT, test probes and range lengths. The studies carried out confirm the relevance of this shorter distance, not only for the evaluation of the peak equivalent istropic radiated power (EIRP) or sensitivity (EIS), but also for the total radiated power (TRP) or sensitivity (TIS). In addition, it is demonstrated that the usual assumption that the TRP or TIS measurement is almost independent from the range length is flawed. Two main reasons relating to the test antenna are established which create this dependence: (i) OTA test probes have a finite resolution, and (ii) the probe and instrumentation typically captures the magnitude of two components of the E-field, which are not straightforwardly related to the power density in the near-field.