Bonded concrete overlay of asphalt mechanical-empirical design procedure

AbstractBonded concrete overlays of asphalt pavements (BCOAs) are becoming a common rehabilitation technique used for distressed hot mix asphalt (HMA) roadways. The original design procedures were based primarily on data from instrumented pavements and finite element modelling. They were governed by the assumption that the failure mechanism was a function of the overlay thickness. However, field observations have indicated that the actual failure modes are dictated by slab size. The newly developed Bonded Concrete Overlay of Asphalt Mechanistic-Empirical design procedure (BCOA-ME) presented here is valid for overlays that are between 2.5 and 6.5 in (64–154 mm), and includes five primary enhancements to the Portland Cement Association and Colorado Department of Transportation procedures that have been traditionally used: 1.) the failure mode is dictated by the joint spacing; 2.) a new structural model for longitudinal cracking for 6-ft × 6-ft (1.8 m × 1.8 m) concrete overlays has been developed to better p...