Tension Force and Structural Parameter Identification of Bridge Cables

Vibration measurement is one of the most widely used methods for tension evaluation and condition assessment of stay cables in cable-stayed bridges. In the existing practice, the tension force of a cable is identified from the measured modal frequencies with the use of the taut string theory or empirical formulae, by assuming pre-determined structural parameters (geometric and material parameters) and boundary conditions of the cable. As a result, an inaccurate estimation of the cable tension may be obtained when there is an error in the pre-determined structural parameters and boundary conditions. Moreover, the commonly used empirical formulae are not applicable in the case when the cable is intermediately attached with dampers. In the present study, a method enabling simultaneous identification of cable tension and other structural parameters from the measured modal frequencies is developed. A precise finite element model (FEM) accounting for cable flexural rigidity, sag-extensibility, spatial variabili...