Design novel three-dimensional network nanostructure for lubricant infused on titanium alloys towards long-term anti-fouling.

Abstract Titanium alloys, recognized as a marine material with great potential, are currently facing serious biofouling problems, which greatly limits its application range. To improve the antifouling performance of titanium alloys, three unique surface of three-dimensional network, grass-like and linear nanostructures were obtained on titanium alloys via hydrothermal treatment in this work. Further, slippery liquid-infused porous surfaces (SLIPSs) were fabricated on titanium alloys via infusing PFPE lubricant into these nanostructures. Water contact angles and sliding angles of SLIPSs were measured to evaluate the effect of nanostructures on the stability of PFPE lubricant layer. Anti-fouling capability of SLIPSs were investigated by quantifying the cells of chlorella and phaeodactylum tricornutum (P. tricornutum)adhered to titanium alloys. The results shows that all the SLIPSs exhibited remarkable inhibition capacity for the settlement of chlorella and P. tricornutum. Among them, the SLIPS with three-dimensional network nanostructure displayed the longest-term anti-fouling performance, and its reduction rate of P. tricornutum and chlorella reaching 77.2 % and 84.5 % after being cultivated for 21 days, respectively, indicating that there existed a positive correlation between the stability of lubricant layer in the artificial seawater and the antifouling effect.