Improvement in thermo‐chemical stability of nanocomposite preformed particle gels for conformance control in harsh oil reservoir conditions

Gel treatment is one of the most promising technologies to improve conformance control in heterogeneous reservoirs. In this paper, new enhanced preformed particle gels (PPGs) are introduced for conformance control in high-temperature and high-salinity oil reservoirs. The thermo-chemical stability of this product is due to the incorporation of a new monomer, N,N-dimethyl acrylamide (DA), to the structure of the last well-known nano-composite PPGs. Four species: N,N-dimethyl acrylamide, 2-acrylamido-2-methylpropane sulphonic sodium salt (AMPSNa), acrylamide (AM) and N-vinylpyrrolidone (NVP) monomers have been used to synthesize these PPGs via free radical crosslinking polymerization at room temperature using N,N-methylenebis (acrylamide) as a cross- linker. The mechanical properties of these new classes of PPGs were enhanced by adding the nano-clay montmorillonite Na+. A temperature stability agent was also used to make these special PPGs compatible with high temperature and salinity reservoir conditions. A systematic study on PPGs preparation was conducted to improve PPGs stability for harsh reservoir conditions that exist in Persian Gulf oil reservoirs (a temperature of 145 °C and a water total dissolved solid of 225 000 mg/L). PPGs prepared with 0.30 g/g (30 wt%) of a 2:1:1:2 molar mass ratio of AM, DA, NVP and AMPSNa could be completely stable for the mentioned conditions. Rheological behaviours of these PPGs were investigated and a mathematical model for prediction of storage modulus up to onset of elastic to viscous phase was presented. The results of study reveal useful insights about the selection of appropriate material for successful conformance control in the heterogeneous reservoirs. This article is protected by copyright. All rights reserved