Comparison of 3 different methods used to measure the rapid shallow breathing index

2012 
Abstract Purpose Rapid shallow breathing index (RSBI) is conveniently measured through the ventilator. If continuous positive airway pressure (CPAP) is used, it may change the RSBI value. We measured the RSBI with a handheld spirometer and through the ventilator, with and without CPAP, to assess differences. Materials and Methods Rapid shallow breathing index was measured in 3 ways: (1) CPAP 0 cm H 2 O and fraction of inspired oxygen (F io 2 ) 0.4, (2) CPAP 5 cm H 2 O and F io 2 0.4, and (3) ventilator disconnected and F io 2 0.21. Tidal volume and respiratory frequency were recorded from ventilator monitor values in methods 1 and 2, and from a handheld spirometer and observed respiratory frequency, in method 3. Results A total of 170 measurements, each using all 3 methods, were obtained from 80 patients admitted to a medical intensive care unit. The mean RSBI values for methods 1, 2, and 3 were 98.1 ± 58.7, 87.6 ± 51.2, and 108.3 ± 65.3, respectively ( P 2 O and by 19.1% when using CPAP 5 cm H 2 O. Conclusions The RSBI values measured through the ventilator with CPAP 5 cm H 2 O are much lower than the values measured with a handheld spirometer. Even the RSBI values measured with CPAP 0 cm H 2 O are significantly lower. This is attributable to the base flow delivered by some ventilators. The difference must be taken into account during weaning assessment.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    18
    References
    9
    Citations
    NaN
    KQI
    []