Effect of Dome Geometry on Swirling Flow Field Characteristics of a Counter-Rotating Radial-Radial Swirler

An experimental study has been conducted to study the effect of the dome geometry on the aerodynamic characteristics of a non-reacting flow field. The flow was generated by a counter-rotating radial-radial swirler consisting of an inner, primary swirler generating counter-clockwise rotation and an outer, secondary swirler generating clockwise rotation. The dome geometry was modified by introducing dome expansion angles of 60° and 45° with respect to the swirler centerline, in addition to the baseline case of sudden expansion (90°). The flow downstream of the swirler is confined by a 50.8mm × 50.8mm × 304.8mm (2″ × 2″ × 12″) plexiglass chamber. A two-component laser doppler velocimetry (LDV) system was used to measure the velocities in the flow field. The dome geometry is seen to have a clear impact on mean swirling flow structure near the swirler exit rather than the downstream flow field. For the configurations with 60° and 45° expansion, no corner recirculation zone is observed and the swirling flow structure is asymmetric due to the non-axisymmetric dome geometry. The cross-section area of central recirculation zone is larger for dome geometry with 60° expansion angle, as compared to the 90° and 45° cases. The configurations with 60° and 45° expansion have higher magnitudes of negative velocity inside the core of central recirculation zone, as compared to the configuration with 90° expansion angle.© 2013 ASME